大旗谷资源网 Design By www.zqyou.com

前言

2017年1月1日起App Store上的所有App应用将强制开启ATS功能。

苹果的ATS(App Transport Security)对服务器硬性3点要求:

① ATS要求TLS1.2或者更高,TLS 是 SSL 新的别称。

② 通讯中的加密套件配置要求支持列出的正向保密。

③ 数字证书必须使用sha256或者更高级的签名哈希算法,并且保证密钥是2048位及以上的RSA密钥或者256位及以上的ECC密钥。

由于领导舍不得花钱,只能辛苦我们自己搞个不花钱的证书。在网上找了一大堆各种配置证书服务的文章,在ios端运行的时候总是直接报错,很是费解,后来注意到必须是TLS1.2或者更高的版本,而按照网上的配置弄好后都是ssl1.0,根本原因没有解决。所以必须先升级服务器ssl的版本,这个升级的文章很多,有用的不多。在这里整理下找到的资料,供大家参考。注意:证书服务可以不用安装,升级ssl后即可正常访问。

1.首先打开服务器组策略,命令行输入gpedit.msc,找到ssl配置设置,双击ssl密码套件顺序,选择已启用,并保存。准备工作完成!

Windows Server 2008 R2 下配置TLS1.2添加自签名证书的图文教程

2.在下面选择您需要的配置并复制,打开Powershell直接粘贴。最后会提示是否重启服务器,输入Y会直接重启,根据自己的情况而定吧,重启后生效哦~

2.1. configure your IIS server with Perfect Forward Secrecy and TLS 1.2:

# Copyright 2016, Alexander Hass
# http://www.hass.de/content/setup-your-iis-ssl-perfect-forward-secrecy-and-tls-12
#
# Version 1.7
# - Windows Version compare failed. Get-CimInstance requires Windows 2012 or later.
# Version 1.6
# - OS version detection for cipher suites order.
# Version 1.5
# - Enabled ECDH and more secure hash functions and reorderd cipher list.
# - Added Client setting for all ciphers.
# Version 1.4
# - RC4 has been disabled.
# Version 1.3
# - MD5 has been disabled.
# Version 1.2
# - Re-factored code style and output
# Version 1.1
# - SSLv3 has been disabled. (Poodle attack protection)
Write-Host 'Configuring IIS with SSL/TLS Deployment Best Practices...'
Write-Host '--------------------------------------------------------------------------------'
# Disable Multi-Protocol Unified Hello
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'Multi-Protocol Unified Hello has been disabled.'
# Disable PCT 1.0
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'PCT 1.0 has been disabled.'
# Disable SSL 2.0 (PCI Compliance)
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'SSL 2.0 has been disabled.'
# NOTE: If you disable SSL 3.0 the you may lock out some people still using
# Windows XP with IE6/7. Without SSL 3.0 enabled, there is no protocol available
# for these people to fall back. Safer shopping certifications may require that
# you disable SSLv3.
#
# Disable SSL 3.0 (PCI Compliance) and enable "Poodle" protection
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client' -name 'DisabledByDefault' -value 1 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'SSL 3.0 has been disabled.'
# Add and Enable TLS 1.0 for client and server SCHANNEL communications
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'TLS 1.0 has been enabled.'
# Add and Enable TLS 1.1 for client and server SCHANNEL communications
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'TLS 1.1 has been enabled.'
# Add and Enable TLS 1.2 for client and server SCHANNEL communications
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client' -name 'DisabledByDefault' -value 0 -PropertyType 'DWord' -Force | Out-Null
Write-Host 'TLS 1.2 has been enabled.'
# Re-create the ciphers key.
New-Item 'HKLM:SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers' -Force | Out-Null
# Disable insecure/weak ciphers.
$insecureCiphers = @(
 'DES 56/56',
 'NULL',
 'RC2 128/128',
 'RC2 40/128',
 'RC2 56/128',
 'RC4 40/128',
 'RC4 56/128',
 'RC4 64/128',
 'RC4 128/128'
)
Foreach ($insecureCipher in $insecureCiphers) {
 $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers', $true).CreateSubKey($insecureCipher)
 $key.SetValue('Enabled', 0, 'DWord')
 $key.close()
 Write-Host "Weak cipher $insecureCipher has been disabled."
}
# Enable new secure ciphers.
# - RC4: It is recommended to disable RC4, but you may lock out WinXP/IE8 if you enforce this. This is a requirement for FIPS 140-2.
# - 3DES: It is recommended to disable these in near future. This is the last cipher supported by Windows XP.
# - Windows Vista and before 'Triple DES 168' was named 'Triple DES 168/168' per https://support.microsoft.com/en-us/kb/245030
$secureCiphers = @(
 'AES 128/128',
 'AES 256/256',
 'Triple DES 168'
)
Foreach ($secureCipher in $secureCiphers) {
 $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers', $true).CreateSubKey($secureCipher)
 New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\$secureCipher" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
 $key.close()
 Write-Host "Strong cipher $secureCipher has been enabled."
}
# Set hashes configuration.
New-Item 'HKLM:SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes' -Force | Out-Null
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5' -Force | Out-Null
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5' -name Enabled -value 0 -PropertyType 'DWord' -Force | Out-Null
$secureHashes = @(
 'SHA',
 'SHA256',
 'SHA384',
 'SHA512'
)
Foreach ($secureHash in $secureHashes) {
 $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes', $true).CreateSubKey($secureHash)
 New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\$secureHash" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
 $key.close()
 Write-Host "Hash $secureHash has been enabled."
}
# Set KeyExchangeAlgorithms configuration.
New-Item 'HKLM:SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms' -Force | Out-Null
$secureKeyExchangeAlgorithms = @(
 'Diffie-Hellman',
 'ECDH',
 'PKCS'
)
Foreach ($secureKeyExchangeAlgorithm in $secureKeyExchangeAlgorithms) {
 $key = (Get-Item HKLM:\).OpenSubKey('SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms', $true).CreateSubKey($secureKeyExchangeAlgorithm)
 New-ItemProperty -path "HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\$secureKeyExchangeAlgorithm" -name 'Enabled' -value '0xffffffff' -PropertyType 'DWord' -Force | Out-Null
 $key.close()
 Write-Host "KeyExchangeAlgorithm $secureKeyExchangeAlgorithm has been enabled."
}
# Set cipher suites order as secure as possible (Enables Perfect Forward Secrecy).
$os = Get-WmiObject -class Win32_OperatingSystem
if ([System.Version]$os.Version -lt [System.Version]'10.0') {
 Write-Host 'Use cipher suites order for Windows 2008R2/2012/2012R2.'
 $cipherSuitesOrder = @(
 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P521',
 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P384',
 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P256',
 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P521',
 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P384',
 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256',
 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P521',
 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P384',
 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P256',
 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P521',
 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P384',
 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P256',
 'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P521',
 'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P384',
 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P521',
 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P384',
 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P256',
 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384_P521',
 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384_P384',
 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P521',
 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P384',
 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P256',
 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P521',
 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P384',
 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P256',
 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P521',
 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P384',
 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P256',
 'TLS_RSA_WITH_AES_256_GCM_SHA384',
 'TLS_RSA_WITH_AES_128_GCM_SHA256',
 'TLS_RSA_WITH_AES_256_CBC_SHA256',
 'TLS_RSA_WITH_AES_128_CBC_SHA256',
 'TLS_RSA_WITH_AES_256_CBC_SHA',
 'TLS_RSA_WITH_AES_128_CBC_SHA',
 'TLS_RSA_WITH_3DES_EDE_CBC_SHA'
 )
}
else {
 Write-Host 'Use cipher suites order for Windows 10/2016 and later.'
 $cipherSuitesOrder = @(
 'TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384',
 'TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256',
 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384',
 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256',
 'TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA',
 'TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA',
 'TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384',
 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256',
 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384',
 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256',
 'TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA',
 'TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA',
 'TLS_RSA_WITH_AES_256_GCM_SHA384',
 'TLS_RSA_WITH_AES_128_GCM_SHA256',
 'TLS_RSA_WITH_AES_256_CBC_SHA256',
 'TLS_RSA_WITH_AES_128_CBC_SHA256',
 'TLS_RSA_WITH_AES_256_CBC_SHA',
 'TLS_RSA_WITH_AES_128_CBC_SHA',
 'TLS_RSA_WITH_3DES_EDE_CBC_SHA'
 )
}
$cipherSuitesAsString = [string]::join(',', $cipherSuitesOrder)
# One user reported this key does not exists on Windows 2012R2. Cannot repro myself on a brand new Windows 2012R2 core machine. Adding this just to be save.
New-Item 'HKLM:\SOFTWARE\Policies\Microsoft\Cryptography\Configuration\SSL\00010002' -ErrorAction SilentlyContinue
New-ItemProperty -path 'HKLM:\SOFTWARE\Policies\Microsoft\Cryptography\Configuration\SSL\00010002' -name 'Functions' -value $cipherSuitesAsString -PropertyType 'String' -Force | Out-Null
Write-Host '--------------------------------------------------------------------------------'
Write-Host 'NOTE: After the system has been rebooted you can verify your server'
Write-Host '  configuration at https://www.ssllabs.com/ssltest/'
Write-Host "--------------------------------------------------------------------------------`n"
Write-Host -ForegroundColor Red 'A computer restart is required to apply settings. Restart computer now"htmlcode">
# Copyright 2016, Alexander Hass
# http://www.hass.de/content/setup-your-iis-ssl-perfect-forward-secrecy-and-tls-12
#
# Version 1.0
# - Rollback script created.
Write-Host 'Reset IIS to weak and insecure SSL defaults...'
Write-Host '--------------------------------------------------------------------------------'
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers' -Force
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\CipherSuites' -Force
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes' -Force
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms' -Force
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols' -Force
New-Item 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -Force
New-ItemProperty -path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client' -name DisabledByDefault -value 1 -PropertyType 'DWord'
New-Item 'HKLM:\SOFTWARE\Policies\Microsoft\Cryptography\Configuration\SSL\00010002' -Force
Restart-Computer -Force

3.最后配置IIS站点,添加ssl自签名证书,站点绑定https,并选择刚添加的自签名证书即可。

4.全称无需给服务器安装证书服务,ios客户端证书校验时默认全部通过即可,如果对安全要求严格的客户端可导入证书做校验。

标签:
server2008自签名证书,server,2008,r2,证书

大旗谷资源网 Design By www.zqyou.com
广告合作:本站广告合作请联系QQ:858582 申请时备注:广告合作(否则不回)
免责声明:本站文章均来自网站采集或用户投稿,网站不提供任何软件下载或自行开发的软件! 如有用户或公司发现本站内容信息存在侵权行为,请邮件告知! 858582#qq.com
大旗谷资源网 Design By www.zqyou.com

评论“Windows Server 2008 R2 下配置TLS1.2添加自签名证书的图文教程”

暂无Windows Server 2008 R2 下配置TLS1.2添加自签名证书的图文教程的评论...